The Powerbrake

Crank up the amp volume and find its sweet spot.

Turn down the powerbreak and you can hear your amps real tone at volumes that won't rattle Grannie's teeth.

Works with Guitar or Bass

    Features

No external power required

No added noise level

No feedback

Remove the speaker output from the back of your amp and plug it into either Sp1 or Sp2 jack sockets of the powerbreak.

Use the supplied speaker cable to connect the amp output to the jack socket labelled 'amp' on the powerbreak. Turn on your amp and off you go.

For personal listening plug in a set of headphones to the socket labelled Hd Ph (speaker simulated output) and this shuts off the speaker altogether so you can listen to the amp through the cans. No disturbance to anyone. You don't even have to have a speaker cab attached to use this facility.

Works with any valve/tube amp up to 150W by placing a soft inductive load on your amp so it won't damage the output transformer. Also the powerbreak can be used with More DI to record to desk or feed into PA for that 'cranked' sound at low stage volume.

£120.00

Click here to go to contact page for more information or purchase.